Home > EV Connector Testing Equipment >

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

Product Categories

Electric Vehicle Testing Equipment [31]
EVSE Testing Equipment [26]
EV Connector Testing Equipment [87]
EV Battery Testing Equipment [49]
Walk In Environmental Test Chamber [31]
Environmental Test Chamber [52]
Temperature Humidity Test Chamber [26]
Water Ingress Testing Equipment [41]
Flammability Testing Equipment [20]
Electrical Safety Testing Equipment [25]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

Name: IEC623681 300V Limited Short Circuit Current Withstand Test System
Brand: Sinuo
Price: 1 USD

Quality IEC62368-1 300V Limited Short Circuit Current Withstand Test System for sale

Brand Name : Sinuo

Model Number : SNQC1020A

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Export packing

Discharge voltage range : DC10-300V

Discharge peak limit current : Not less than 14KA

Discharge peak current : Digitally configurable

Discharge voltage : Programmable control

Device power supply : AC220V 50Hz/60Hz，5KVA,

Equipment dimensions : W1800×D900×H1800mm

Current accuracy : Level 0.5 or better, resolution ≤1A;

Voltage accuracy : Level 1 or better, resolution ≤1V;

Contact Now

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

Complied Standards & Clauses

Conforms to Appendix R in IEC62368-1:2019.

Product Overview

The system uses an energy storage device to store energy according to the set parameters, and discharges when the set voltage is reached to realize the large current output test function. The attenuation oscillation frequency of the current is 50±2Hz, simulating the power frequency, and the peak current can reach 14KA (10KA sine wave peak), it will automatically charge for the next round of testing after the discharge is completed.

During the test process, the discharge current waveform is recorded and the current-time curve is automatically generated.

Meet the testing requirements of power supply power of 300V*10KA=3MVA in ordinary laboratories;

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

In the above schematic block diagram, the design is damped attenuation oscillation (α<1), and the loop equation is:

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

The actual current waveform is shown in Figure a above.

Technical Parameters

Discharge peak current	Digitally configurable
Discharge voltage	Programmable control
Discharge voltage range	DC10-300V, automatically controlled by program
Discharge peak limit current	Not less than 14KA (sine wave peak value of 10KA)
Discharge time	Not less than 20ms, attenuate oscillation according to sinusoidal curve (Using special charging and discharging components for high-efficiency energy storage, no memory effect, long life)
Deviation range during test	Current 95% ~ 105%; voltage 100% ~ 105%; frequency 95% ~ 105%;
Current accuracy	Level 0.5 or better, resolution ≤1A;
Voltage accuracy	Level 1 or better, resolution ≤1V;
Discharge resistor	1.Made of constantan wire material, the resistance is stable and reliable for a long time 2. Special high-current contactor switch is used for switching control
Current waveform	Using high-precision Rogowski coil measurement, the measuring range is 20KA and the bandwidth can reach 2MHz.
Control host	1. Use an integrated LCD touch screen computer host with a 15-inch monitor, 64G solid-state drive, and 8G memory. 2. Configure a high-speed data acquisition card to accurately measure the discharge current waveform. 3. The current waveform curve can be stored and exported. 4. After the parameters are set, the program automatically tests, automatically analyzes the loop impedance, and automatically adjusts the voltage to adapt.
Protective function	Equipped with overvoltage and overcurrent protection function
Device output interface	A. Protection switch SCPD (such as 25A) or fuse: the user can connect it externally by himself B. Output wire: According to the cross-sectional area of the wire number, the user can connect it by himself C. When the equipment leaves the factory, an acrylic protective cover is provided, which can be adapted to most products under test.
Device power supply	AC220V 50Hz/60Hz,5KVA,
Equipment dimensions	Approximate W1800×D900×H1800mm
Equipment weight	750Kg
Working environment	Temperature 0~30℃, relative humidity no more than 80% and no condensation, steam and corrosive gas

Details

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

Product Tags:

IEC62368-1 300V Limited Short Circuit Current Withstand Test System Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

IEC62368-1 300V Limited Short Circuit Current Withstand Test System

Short Circuit Current Withstand Test System

300V Short Circuit Current Withstand Test System

IEC62368-1 EV Connector Testing Equipment

IEC62368-1 300V Limited Short Circuit Current Withstand Test System Images